Download 1.0 Overview




The ‘NVR parameters’ which are used to set up the Z-Wave external ‘Non-volatile memory
(NVM)' are highlighted in the list in red: NVMCS, NVMT, NVMS, NVMP
By default, the programming script will simply use the value of each parameter (NVMCS,
NVMT, NVMS, NVMP) which it read from the target device at the start of the script.
If you wish to configure custom values for the external ‘Non-volatile memory (NVM)'
parameters to match the hardware configuration of your target board, then please follow the
instructions below....
AN145- In-System Programming (ISP) of Sigma Z-Wave 500 series SOC devices and modules
51