Download Electronic Instrumentation
Transcript
CAEN Electronic Instrumentation VMEIRQCheck Description This function allows to read the status of interrupt requests on the VME bus (IRQ1-7) and, for this reason, the handle to be passed is the VME master one, not the digitizer one. This function can only be used for digitizer that communicate via the VME bus. The purpose of this function is almost exclusively for debugging. Synopsis CAEN_DGTZ_ErrorCode CAENDGTZ_API CAEN_DGTZ_VMEIRQCheck(int VMEHandle, uint8_t *Mask ); Arguments Name VMEHandle *Mask Description Device handler of the VME bridge that handles the interrupts Mask of the IRQ lines read from the VME bus (1=IRQ active, 0=IRQ not active) Return Values 0: Success; Negative numbers are error codes (see Return Codes). IACKCycle Description This function performs an interrupt acknowledge cycle on the digitizer identified by the handle. This function can only be used for direct communications via optical links; in case of communication via the VME, it should be used VMEIACKCycle described farther. Although in the case of direct connection to the optical link there is not need to identify the digitizer that generated the interrupt request, the IACK cycle is still executed in the case of mode ROAK (release on acknowledge) to release the request Synopsis CAEN_DGTZ_ErrorCode CAENDGTZ_API CAEN_DGTZ_IACKCycle(int handle, int32_t *board_id ); Arguments Name handle *board_id Description Device handler of the digitizer Data (status_id) returned by the digitizer that asserted the interrupt request. Return Values 0: Success; Negative numbers are error codes (see Return Codes). 17 UM1935 – CAENDigitizer User & Reference Manual