Download User`s Manual
Transcript
Model 2700 Multimeter/Switch System User’s Manual Close/Open Switching Module Channels 2-29 CARD menu The CARD menu identifies the switching modules installed in the mainframe, and is used for the following operations: • • Configure digital inputs and outputs, and analog outputs for switching modules that have one or more of those capabilities (i.e., Models 7706 and 7707). View the analog input channels that are presently closed. Also, read digital input and output ports, and analog output values for switching modules that have one or more of those capabilities. Menu navigation keys — Once in the menu structure, the manual range keys ( and ) and the cursor keys ( and ) are used to display menu items and options, and set parameter values. With the desired item, option, or setting displayed, press the ENTER key to select it. You can cancel a pending selection (and exit the menu structure) by pressing the EXIT key. Press the SHIFT key and then the CARD key to display the CARD menu. The Card menu tree is shown in Figure 2-11. The items and options of the menu are explained as follows: NOTE Identifying installed modules — If you simply want to identify installed modules or pseudocards, select CONFIG or VIEW and use the or key to check each slot. When finished, press EXIT. CARD: CONFIG — This menu item is used to configure switching modules. The channels of the Model 7700 switching module and other similar type modules do not need to be configured. Figure 2-11 CARD menu tree SHIFT CARD VIEW CONFIG SLOT1: 77XX SLOT2: 77XX 77XX = Model number of installed switching module. SLOT1: 77XX SLOT2: 77XX Scrolls Channels Scrolls Channels
Related documents
Model 2700 Multimeter/Switch System
Manual - Test Equipment Depot
Model 2701 Ethernet-Based DMM / Data Acquisition
User Manual
NomadaIP Hardware and Reference Manual Rev1.4
Manual - Test Equipment Depot
Series 3700A System Switch/Multimeter User`s Manual
Model 27XXIntegra Series Quick Start Guide
Keithley -- 2750 -
Model 2790 Sourcemeter Switch system User`s Manual
Training Manual - System Administration V4-7
Model 2520Pulsed Laser Diode Test System User`s Manual