Download Feed-forward Control System for Fed

3. While defining or modifying the formula, “Items” button can be used to facilitate
the procedure.
Figure A2.3- Edit formulas dialog
A2.5. Install new device
1. In addition to pH, temperature and oxygen probes coupled with the bio console
and BioXpert software, further devices may be installed on the software through
“new device” dialog under “install” tab, which leads to another window.
2. On that window, communication interface between the computer and the new
device
has
to
be
defined
as
either
“ADDA
card,”
shown
in
Figure A2.4 or “serial port,” displayed in Figure A2.5.
3. For “ADDA card” selection, the name and I/O port address of the device need to
be entered and “ADDA card” test may be run to check signals between the device
and computer.
4. For the “serial port” option, protocol and com ID are defined to the software.
Setting of baud rate, data bits, parity and stop bits are changed from “settings”
button for serial port selection.
35