Download Operator`s Manual

Operation
Operator and Joint information can be entered with or without
a connection to the DataLogger®. In the Log/Status dialog
box, tap Setup… to begin entering information for the next
joint. A series of dialog boxes will prompt you to enter the
information one step at a time, beginning with the Machine
dialog box:
PH02932-3-14-05
Setting up to Log a Joint
Tap in the field where new text is to be entered or change, and
tap in new text using the on screen keyboard. The machine
ID is a 20-character field that accepts alphabets and numeric
characters. When done, tap the keyboard icon to remove the
on screen keyboard.
PH02933-3-14-05
To select a new machine model, tap the down arrow icon and
scroll to select a machine from the list:
PH02934-3-14-05
To enter new text or edit the Machine ID text field, tap the
keyboard icon at the lower right corner to bring up the on
screen keyboard:
5-5