Download Operator`s Manual

Transcript
Operation
PH02946-3-11-05
Logging the Fusion Process
After taping the Start button on the Pocket PC to log data, the
Pocket PC transmit all the data entered to the DataLogger®. You
will see a screen such as:
PH02947-3-11-05
This screen and subsequent ones show the data blocks that are
transmitted to the DataLogger®. Once the data is transmitted,
the stopwatch appears at the bottom of the dialog box:
PH02948-3-11-05
At this point, you may proceed to close the carriage to move the
pipes towards the heater plate. The stopwatch will continue to
count, and the status updated. The DataLogger® will flash it’s
red LED to indicate it is in logging mode.
5 - 10