Download Users Manual - Interfaze Technologies Home



o Edit in Note Pad  Allows an expert view for tweaking the playlist
with a text editor
NOTE: Be careful with this option—if you type a wrong value
or character here, you can destroy the whole playlist!!
Print Playlist will print the PlayList. This is handy if you wish to
create a physical cue sheet for your panel operator (or a cue sheet
for a venue which is controlling its own lights, rather than using
DigiSelect)
DigiDMX opens the DigiDMX Programming Panel, which is where
you program your lighting cues. This will be covered in detail later in
this manual.
Help
o About  will bring up a screen showing the Version of DigiSelect
being used and your Registration Key (if entered) as well as other
information about the program. Click Exit on this box to close.
o User Manual  will open this manual in your browser.
The DigiDMX Screen
This is the screen where you set up your DMX lighting and effects scenes.
NOTE:
In our illustration, at the top of the screen, there is a message “Failed to open
DMX USB Device”. This will appear if your computer is receiving no DMX signal
through a USB port or, in other words, if your lights and their USB controller are
not connected. Once everything is connected properly, this should read
“Connected”.
You can still program your lights without having them connected, but it relies on
you having a very good knowledge of each of your lighting fixtures, so the values
you set for each actually does reflect what the light is meant to do.
21