Download User manual - Oce Display Graphics Systems Inc.

Product Compliance
Product Compliance
Introduction
Electromagnetic Compatibility:
This equipment generates, uses and radiates radio frequency energy and if not installed and used as designed or
intended, may cause interference to radio communications. This equipment has been tested and found to comply
with the limits for a Class A computing device. This equipment has been designed to provide reasonable protection
against such interference when operated in residential and commercial environments. Operation of this equipment
in a residential area may cause interference, in which case the user, at his own expense, is required to take whatever
measures are required to correct the interference.
The Arizona T220UV complies to the following Agencies and Standards:
[1]
[1] Compliance Specifications
Specification Directive
Number
EMC
(Directive 89/336/EEC)
EN61000-6-4
EN61000-6-2
EN61000-3-3 1995+A1
EN55011
Electrical Safety
(Low Voltage Directive 73/23/EEC)
EN60950: 2000(A1 thru A4, A11)
IEC 60950, UL60950, CAN/CSA 22.2 No. 60950-00
EN60204-1:2001
Compliance Category
This device complies with Class A emmision limits.
This equipment is considered to be information technology equipment for use in a light industrial setting. The
equipment falls under the scope of the Machinery Directive due to the movement associated with the gantry
carrying the printer head carriage assembly. As such, a full risk assessment per EN 1050 and a full mechanical and
machinery assessment per 292-2 + A1 Annex 1 was performed. As the equipment is primarily information
technology equipment (large format printer receiving data from a computer terminal), and is within the scope of
EN 60950 (mains operated ITE equipment under 600V including plotters and photoprinters - clause 1.1.1, EN
60950: 2000), a full electrical evaluation was performed per EN 60950:2000.
Noise Measurement Test Summary
Tested according to EN13023:2003, EN11204, ISO3744:1994(E)/ISO3746:1995(E) and declared according to
ISO4871:1984(E)
Measurements taken at the sample in 5 different locations, Printer in normal operation with Vacuum Pump, exceed
75dB (maximum measured value: 76.8dB). For all locations, provide noise protection enclosure or remove pump
from location.
Complete report is available upon request:
Colin Soutar
Health, Safety and Environment
Océ Display Graphics Systems (ODGS)
13231 Delf Place Building #501
Richmond, British Columbia.
Canada V6V 2C3
Email: [email protected]
9