Download Starting SCORBASE

Prevents the SCORBASE application from staying on top
of the desktop. This command can be activated only when
SCORBASE is open.
Minimizes the SCORBASE application. This command can
be activated only when SCORBASE is open.
Restores the SCORBASE application. This command can
be activated only when SCORBASE is open.
Closes the SCORBASE application. This command can be
activated only when SCORBASE is open.
/U
/M
/E
/C
/CIMDD_ONLINE
Open CIM-SCORBASE device driver mode: Online
/CIMDD_SIMUL_AUTO
Open CIM-SCORBASE device driver mode: Simulation
/CIMDD_STANDALONE_ONLY Open CIM-SCORBASE device driver mode: Standalone
Examples of SCORBASE command line procedures are provided, as follows:
Loading a workspace in simulation mode:
•
At the prompt, type the following:
SCORBASE.EXE /S /L=”C:\PROGRAM FILES\INTELITEK\
ROBOCELL\PROJECTS\ER9u\Act3.WS”. The workspace will be
loaded in simulation mode.
Loading the software in online mode and homing the robot:
•
User Manual
0602
At the prompt, type the following:
SCORBASE.EXE /O /H /R=”C:\PROGRAM
FILES\INTELITEK\ROBOCELL\PROJECTS\ER4u\Er4Cell1.WS”.
The workspace will be loaded in online mode and the robot will be
homed.
102
SCORBASE
System Configuration