Download PowerHome QuickStart Guide
Transcript
Turning On A Light 3.1 But, How Do I Turn On A Light? If you’re like most PowerHome users, you’ve already thought about the many things you want to do with PowerHome. PowerHome can control not only home lighting (X-10 and Insteon) but home theaters (through IR and RS232, X-10 and Insteon), blinds and drapes, heating and air conditioning systems, security systems (Elk M1 Gold), sprinklers, make voice announcements, get the weather through the Web and announce it or show it on your PC, touch screen or web enabled phone, announce telephone callers (Caller ID with an appropriate modem) and the list goes on. PowerHome can control your home not only through your PC, but through remote PCs throughout your home, touch screens, through the web and email. It can email you home status reports, alerts or whatever you choose. This list is not exhaustive. Imaginative PowerHome users have implemented many additional uses for PowerHome.. An active PowerHome user forum, where PowerHome users share ideas, can be found at http://www.powerhome.com/forum/default.asp. The first thing most new PowerHome users want to know is how to turn on a light. This part of the QuickStart guide will take you through the basic steps to turn an Insteon light switch on and off. The rest of the QuickStart guide will take you on a brief tour of some of PowerHome’s features. Additional instructions and features can be found in the PowerHome Users Manual. 3.2 Checklist For Turning On An Insteon Light Install PowerHome (see section 2 above) Let PowerHome know you have an Insteon PowerLinc Controller (see section 3.3) Let PowerHome know you have an Insteon light switch (see section 3.4) Turn on the light using the Device Status Screen (see section 3.5) Or Turn on the light using the Insteon Explorer Screen (see section 3.6) Or Turn on the light using a macro (see section 3.7) Or Turn on the light using a timed event (see section 3.8) 3.3 Let PowerHome Know You Have An Insteon PowerLinc Controller PowerHome interfaces with your home through a variety of hardware controllers connected to your PC. The various controllers supported by PowerHome are capable of sending and receiving Insteon and X-10 signals (powerline and RF), IR (infrared) signals, digital inputs / outputs, and analog inputs / outputs. You should have at least one controller connected to PowerHome, but you can have multiple controllers connected to PowerHome through your PC. To set PowerHome up for Insteon use, you must first let PowerHome know that you have an Insteon controller connected to your PC. You do this through the PowerHome Explorer. If you have not already done so, start PowerHome on your computer. 10