Download Network Instrumentaion Module Loader Package SLP

Chapter 6. PARAMETER SETTINGS
6 - 6
Monitoring Module Operations
■■ Overview
Monitoring of module operations is done in the [Universal monitor] window. For
details, refer to:
Chapter 7. UNIVERSAL MONITORING.
Handling Precautions
• When changing parameters in the universal monitor, the changes are
applied to modules, so the loader’s project data remains unchanged.
If the changes need to be applied to the project data as well, perform
parameter reading.
■■ Method of Operation
A simple sequence method is explained as follows.
[1]
Select a workgroup from the Project window’s project tree to display the
[Workgroup] view. Perform one of the following operations to start up the
universal monitor.
• Select [4: Monitor] under [Operation list] in the [Workgroup] view’s
contents area.
• Select [Online] → [Monitor] from the Project window’s menu bar.
• Select the
icon from the Project window’s tool bar.
>>The Universal Monitor Startup dialog box is then displayed.
6–40