Download Network Instrumentaion Module Loader Package SLP

Chapter 5. ACTUAL MODULE COMMUNICATION SETTINGS
5 - 4
Module LED Lights
The module LED light function is used to confirm which module is an actual module when numbering a module’s
IP address, etc.
[1]
Select a desired Chain Name from the Actual Module Configuration Tree
in the [Actual module configuration] window, then check a check box
under [Target] for the module you want to light up from the [List] tab in the
contents area, and click [Lit LED].
>>The [Lit module LED] dialog box will then be displayed.
[2]
Set the values in the [Lighting indication] area, and click [OK].
In this area, you can select as the lighting type as [Timer], [ON], or [OFF].
When you select [Timer], you can also set the lighting time(s) as a value
between 1 and 255 seconds.
>>All top LED lights will flash at a low speed for target modules.
5–15