Download User Manual - Bioresonator Good Eye

Sensor tip
Sensor housing
Figure 6-­‐1 6.3 Cleaning and disinfection None of the ART® unit's components/parts or accessories may be exposed to sterilisation processes. The unit and its accessories are not cleaned/disinfected when supplied, but this must take place before initial use. 6.3.1 Cleaning the casing The instrument housing, the sensor housing, the sensor arm and any accessories must be cleaned at regular intervals; the recommended interval is once daily, more frequently in the presence of suspected contamination. All components must be cleaned before storing in their storage case. The recommended method of cleaning these parts is drying with an alcohol swab or soft cloth/towel (e.g. Kleenex-­‐towel) lightly moistened in alcohol (70–96% Ethanol/Isopropanol). Note that the cloth must not be dripping wet as this may damage the unit. 6.3.2 Cleaning of sensitive parts The sensor tip, the sensor element and the connector at the end of the sensor housing must be cleaned as described below before the first ART® Manual User Manual ART -­‐ en.doc 31