Download be!set!up!

Annex 2. Operation Modes of PGM Outputs Function of a PGM output Output signal Bell Output for connecting a sound-­‐emitting (siren) device. A continuous or a wailing PGMx output signal is sounded once a signal from input ZNx is received. Set by default to output PGM1. Fire Alarm
Alarm
OFF ON Buzzer Output for connecting a sound-­‐emitting (siren) device. A wailing signal is sounded during Exit Delay time. A continuous signal is sounded during Entry Delay time or once the zone is breached. ON
ON Delay
ON
Flash System State Ready AC OK Battery OK ON
Output for connecting a light-­‐emitting device. A continuous signal is sounded when the alarm is armed and a wailing signal is sounded when it is breached. Alarm
ON OFF ON Output for connecting a light-­‐emitting indicator of the alarm system status. A continuous signal is sounded when the alarm is armed and a wailing signal is sounded during Entry Delay and Exit Delay times. Set by default to output PGM2 ON
ON OFF ON Output for connecting a light-­‐emitting indicator of the input status. A continuous signal is sounded when all ZN inputs are in order. Set by default to output PGM3. ON All Zones OK
OFF ON Output for connecting an indicator of power supply by AC source status. ON AC OK
OFF ON Output for connecting an indicator of power supply by battery status. Battery OK
OFF
OFF
ON
31