Download EPM1000 User`s Guide

Features & Description
Front Panel
(Continued)
System Keys
These three keys navigate through the EPM1000’s configuration menus.
0
COMM
.
SET
ENT
This key permits modification of the EPM1000’s
communication parameters (such as baud rate, I/O
port, etc.) by offering access to the communications
parameters menu. It is also the “0” key for the Numeric Entry Keys.
This key permits modification of the EPM1000’s
system parameters (such as display speedup and
backlight) by offering access to the system parameters
menu. It also acts as the decimal point entry key for
the Numeric Entry Keys.
Pressing this key during configuration menus or while
entering a number on the numeric keypad will accept
the currently displayed value or number.
Numeric Entry Keys
Use this keypad for data entry, such as detector
responsivity or setup information such as statistics
batch size.
7
8
9
4
5
6
1
2
3
Analog Meter
The EPM1000's analog meter uses two scales, one marked 0-10 and one
marked 0-3. The 1 and 3 scale indicators on the LCD indicate respectively which scale the EPM1000 is using.
Zero Adjustment Screw
Use this screw to adjust the zero of the analog meter.
EPM1000 User’s Guide
17