Download EPM1000 User`s Guide

Specifications
Specifications
Electrical/Mechanical
Display
•
•
•
•
Four numeric digits with polarity sign.
Two alphanumeric characters
Annunciators for statistical functions, trigger, and communications
Backlight on/off switchable
Ranges (Ranges are limited to
•
•
•
•
•
Energy
Power
Frequency
Volts
Volts
1 pJ to 10 J in 28 ranges
1 mW to 10 kW in 15 ranges
0.1 to 500 Hz (for pyroelectric/silicon probes only)
2 mV to 30 V (for pyroelectric/silicon probes only)
200 µV to 1 V (for thermopile probes)
•
•
•
•
Energy
Power
Frequency
Volts
1:3000 of full scale
1:3000 of full scale
0.1 Hz
10 µV
5 or 6 decades depending on
probe type)
Resolution
Maximum Rep Rate
• 1000 Hz
Linearity
• ±1%
A/D Digital Resolution
• 12 bit
Input Impendance
Noise Equivalent Voltage
(NEV)
Analog Output
External Trigger Input
EPM1000 User’s Guide
• 1 MΩ (50 Ω output probes require a feedthrough terminator)
• 50 µV typical
•
•
•
•
Full scale output 1.81VDC
Output Impedance 100 Ω
Minimum load 600 Ω
Update Rate 3 Hz
• Optically coupled
• 100 Ω in series with LED
• Rising/falling edge trigger via user control.
47