Download SAMPLE CORE I.P. TESTER

1
Introduction
The SCIP (Sample Core I.P.) tester is a new compact, lightweight, low consumption unit designed
for resistivity measurements.
The SCIP tester uses a field handheld computer to process data acquisition. The operating system
is Windows Mobile 5.0.
Characteristics:

Related to the GDD Rx 8-32: The SCIP acts as a 1 dipole receiver relating DDH Cores to
resistivity and IP survey.

Programmable windows: The SCIP offers twenty fully programmable windows for a higher
flexibility in the definition of the IP decay curve.

Modes available: Arithmetic, logarithmic, semi-logarithmic, Cole-Cole and user defined.

IP display: Chargeability values, Resistivity and IP decay curves are displayed in real time on
a PDA.

Internal memory: Over 100 000 readings can be stored in the internal memory of the PDA.
Each reading includes the full set of parameters characterizing measurements. Data are
stored on flash type memory and cannot be lost even if the battery of the PDA is totally
discharged or absent.

Transmitting mode : Can be used as a low voltage transmitter of 3, 6, 9 or 12V or 0.5, 5, 50
or 500uA.
Instrumentation GDD inc.
2012-05-03
Page 3