Download EVO User Manual V5.0

Plug-ins, ReWire and External Processing
November 13, 2014
Removing a Plug-in
Step 1
Select the track.
Step 2
Press the Insert Config button in the Setup or Mixer Megamode.
Step 3
If there is more than one plug-in, and you need to select the right one, press the Padlock button,
the the Config soft key, then press the Next button until the desired plug-in is shown on the
screen.
Step4
Press the Remove Plugin soft key. The LCD screen (between the soft keys) will now display the
first of a list of plug-ins that you have installed.
Selecting Plug-ins
For a channel with a single plug-in:
Step 1
Select the channel.
Step 2
Press the Plug-in button in the Mixer Megamode.
This will cause the plug-in GUI to become visible on the screen.
If the channel has multiple plug-ins:
Step 1
Press the Plug-in button a second time in the Mixer Megamode.
Step 2
Press the Config soft key.
Step 3
Press the Next soft key until the desired plug is selected, then delete as above.
Controlling Plug-ins on Screen
Each Plug-in comes with a graphical user interface (GUI) designed by its manufacturer). To display the
GUI, do one of the following:

Press the Plug-ins button in the Mixer Megamode. This will display the current plug-in for the
current channel.

Double-click a Plug-in in the EVO Mixer Screen Channel
Double click to display
Click an indvidual plug-in
once to bypass it
.
Click to bypass
all plug-ins
Page 297