Download SUNY Structural Operation Manual

FRF Plotter (continued)
Control Descriptions
(continued)
Control
Description
Points text box
Selects and shows the number of points displayed at the selected scale.
You can enter a number of points in this box (range 32 to 384).
Update both button
The Update both button updates the display to the most current
frequency response function for both signals.
Display area text boxes
The text boxes surrounding the display area show the values of the
upper and lower ranges currently displayed.
• The top and bottom text boxes on the right and left sides show the
minimum and maximum values of the A and B traces (respectively);
the right and left text boxes on the bottom of the monitor show
frequency.
• If you click on a specific point in the display area, a dot appears,
and the corresponding X and Y values will be shown in the text
boxes in the right center, bottom center, and left center.
Save
Click to save plotted values to a text file. A dialog box will appear to
ask for a file name.
Control Panel Reference
5-17