Download User Manual - SOLID APPLIED TECHNOLOGIES LTD (SolidAT)

Reset and operating hours
GaugerGSM/485 may be reset to their factory defaults. This operation may be performed from the
keypad or from the PC configuration tool (command RSD). Once executed, the Gauger will return to the
state as delivered from the factory. GaugerGSM/485 may also be reset to restart without any change in
the pre-configured parameters (command RST).
GaugerGSM/485 keeps track of two counters for measuring operating hours.
 Non resettable counter (Odometer principle)
 Resettable counter (Trip-meter principle)
The non-resettable counter displays the total hours of operation since the system is out of the factory.
This counter aids both manufacturer and user in keeping track of specific GaugerGSM/485 history. The
resettable counter displays the total hours of operation since last reset of this counter. This counter aids
the user in keeping track of the equipment for maintenance and other operations. The resettable
counter may be activated from the built-in display or using the PC command RSC.
______________________________________________________________________________
GaugerGSM/485 – User Manual
page 109 of 126
May 2014 Rev 4.4