Download OkMap User manual

OkMap – User manual
December 14, 2015
Send current position to GpsGate
This function is used to send the current location to the remote server GpsGate.com, during
the navigation NMEA with the connected GPS.
The computer that sends data is defined client, while the computer that receives data (in this
case GpsGate.com) is defined server; multiple clients can send data simultaneously to the
server.
To use this feature you must first subscribe to GpsGate.com.
To receive the positions of the clients you can activate the receive data
from
function;
this
information
can
be
displayed
on
a
map
obtaining
the
tracks
of
GpsGate.com
the clients movements.
Before to access this function, make sure you have properly configured the parameters for
communication to the server in the function Preferences - GpsGate.com and you are
connected to the network.
This function only works if the Navigation mode or Navigation simulator are active.
The function is activated / deactivated through the menu Navigate - Send to
GpsGate.com.
Center the map
This function is to keep the map centered during the navigation NMEA with the
connected GPS.
This function only works if the Navigation mode or Navigation simulator are active.
The function is activated / deactivated through the menu Navigate - Keep center map.
Page 162