Download CAAPE User`s Manual

Simulator Reference
ON_NVSER_SENDING( *INT PORT, *STRING ADDRESS, *INT POSITION, BOOL
STATUS )
Called when a message is about to be sent from the serial port.
•
PORT is the port number, from 1 to max.
•
ADDRESS is the message address.
•
POSITION is the zero-based position of the indication message in the list of
indications assigned to the port.
•
STATUS is a pointer to an internal variable returned to the simulator. Set this
variable True to prevent the simulator from sending the message (for example,
some protocol might require a special message bit to be set first, and the data
to be transmitted only when another special message bit is set).
ON_NVSER_SENT( *INT PORT, *STRING ADDRESS, *INT POSITION, BOOL
STATUS )
Called when a message is sent from the serial port.
•
PORT is the port number, from 1 to max.
•
ADDRESS is the message address.
•
POSITION is the zero-based position of the indication message in the list of
indications assigned to the port.
•
STATUS is a pointer to an internal variable returned to the simulator. Set the
variable True to acknowledge that the event was processed.
P2512A, Rev. J, Aug/15
13-27
Alstom Signaling Inc.