Download User Manual

ECTACO® jetBook® COLOR
User Manual
 Make sure the device is turned on.
 Unfasten the USB port cover and then connect ECTACO®
C­Pen® to the standard USB port on ECTACO® jetBook®
COLOR using the supplied USB cable. On ECTACO® jetBook®
COLOR, the scanner can only be connected to the standard
USB port. It will not work when connected to the mini-USB port.
You will see the ECTACO/C-Pen window with a text area and a
toolbar.
 Select the desired language by tapping the Language button on
the toolbar.
 Place the tip of ECTACO® C-Pen® before the first character of
your text. The leg with the touch trigger should be below the text
line and the other leg above the text line.
 Keep the touch trigger pressed onto the surface and move
ECTACO® C-Pen® over the line of text. You can move
ECTACO® C-Pen® either left-to-right or right-to-left over the text.
 Lift your ECTACO® C-Pen®. The text will appear in the text area.
Use the TTS button on the toolbar to hear the text pronounced.
 Tap the desired application button. The text will be transferred
to the selected application.
The Function key on ECTACO® C-Pen® lets you clear the text
area so that you can start again.
21