Download User Manual
Transcript
59 TeleType GPS Manual This feature is intended for viewing rural area maps only. It should not be used for viewing urban area maps. Doing so would cause your computer to operate at extremely slow speeds. 2. Auto Load/Unload Starting with version 092003, the software now supports automatic loading and unloading of maps as you drive. This means that when you drive into an area for which there are no maps loaded, the software will automatically display those maps. Here you can choose which type of maps the software will automatically display while traveling. 3. Visible Waypoints - Specify the number of waypoints you wish to display at one time. For example, if you create a trail of 100 points, you may wish to view only the last 30 points. This feature is often used when tracking remote vehicles. When using vehicle tracking you may want to increase this number for longer tracks. 4. Waypoint Coordinates Format - Select from three different formats for the waypoint coordinates. The three choices are degree-decimal, decimal-degree, and degree-minute-second format. The waypoint coordinate format specified here reflects the latitude and longitude format when you create a waypoint in the Waypoints window. See Also: Loading Maps Unloading Maps Waypoints Window Points of Interest (POIs) 3.2.5.4 Restaurant The Restaurant Preferences tab (PDA) © 2003 TeleType GPS