1
Download AT command set documentation
Transcript
AT Command Manual for GR64 & GS64 10.3 AT&S Circuit 107 (DSR) Response Command Long SIM Parameter Affected by Works with Works with CFUN Abortable Execution Required Setting &F, &W USB MUX Modes No No No Local Yes Yes Yes 1,4,5 Description Command Set behavior of data set ready Show the current setting Test if the command is supported AT&S[<value>] AT&S? AT&S=? Possible Responses OK ERROR &S: <value> OK &S: (list of supported <value>s) OK Description: This command configures the behavior of the data set ready signal. Some modem drivers, such as Windows “standard modem”, may require DSR to always be asserted (AT&S0), to work properly. NOTE Defined values: <value> Description 0 DSR always on. 1 DSR on in data mode. DSR off in command mode. Default value. © 2006 Page : 256 of 504
