Download Operation Manual

Enter menu P1 Calibration.
Scroll to parameter 04 Temp. calibr.
Press the navigation key.
8.1.4. Calibration test
During calibration test value of calibration mass is compared to present result
of weighing.
It is just checking and the result have no influence on changes of factors. After
displaying results press key ESC.
Calibration test
a)
b)
c)
d)
e)
Move to submenu P1 – Calibration.
Scroll to function Calibration test
Press key Right
The instrument makes test
Check results
Cal. – load on the pan
Act. – calibration mass in moisture analyzer memory
Dif. – difference between these two values
Return to weighing mode in point 6 of instruction manual.
8.1.5. Temperature calibration
Parameter enebling to carry out temperature sensor calibration in drying
chamber.
8.1.6. Printout of the calibration report
After each calibration report can be printed. The report is printed on external
printer or sent to computer and recorded in the file to archivize.
P1 08 Print report : 1 : on – report is printed
P1 08 Print report : 0 : off – without printing report
- 21 -