Download Operation Manual

Function
Command
SEND LAST ERROR CODE
ER CR LF (sends last code in the instrument)
Function
Command
DISPLAY HEADLINE
DH CR LF (sends in headline „upper bargraph“ on the display
series of sings)
Function
Command
CANCELL HEADLINE
CH CR LF (cancel „upper bargfaph“ in the headline)
Function
Command
MAKE INTERNAL CALIBRATION
CL CR LF (starts internal calibration)
Function
Command
BLOCK THE KEYBOARD
KL CR LF (blocks the keyboard)
Function
Command
UNBLOCK THE KEYBOARD
KU CR LF (unblocks the keyboard)
Function
Command
SWITCH OFF THE „ECHO“ OF THE KEYBOARD
E0 CR LF (switches off sending codes of the keys)
Function
Command
SWITCH ON THE „ECHO“ OF THE KEYBOARD
E1 CR LF (switches on sending codes of the keys)
Function
Command
SWITCH OFF THE INSTRUMENT
O0 CR LF (switches off the moisture analyzer – the same as
usage ON/OFF)
Function
Command
SWITCH ON THE INSTRUMENT
O1 CR LF (switches on the moisture analyzer – the same as
usage ON/OFF)
Function
Command
SWITCH OFF THE AUTOZERO
A0 CR LF (switch off autozero)
Function
Command
SWITCH ON THE AUTOZERO
A1 CR LF (switch off autozero)
Function
Command
GIVE OR CHANGE ID
ID n CR LF (the moisture analyzer sends settled code or change
this code) n=1 ÷ 6
SEND THE PRINTOUT NUMBER n
PP n CR LF (the moisture analyzer sends programmed printout
with number n) n=0 ÷ 4
Function
Command
- 69 -