Download Instruction Manual - Login

Chapter 2
_________________________________________________________________________________________
5. Repeat steps 1 to 4 to connect all the necessary wires for the analogue outputs
you need.
Fig.2.2 The Current Loop and Alarm Relay connector
Screw Terminal
Number
Assignment
1&2
Low limit relay
3&4
High limit relay
5
Chassis
6&7
Hydrocarbon values
8
Chassis
9 & 10
Carbon dioxide values
11
Chassis
12 & 13
Oxygen values
14
Chassis
15 & 16
Unassigned
Table 2.1 Assignments for the analogue output socket
The range of the signals that come from the current outputs are user-scalable (the usable range is between 0 and 24 mA). This enables you to select a range that best suits
the concentrations of the gas you are measuring, and obtain the optimum resolution for
the process computer. These definable values are set via the PC software. Definition is
described in section 3.3.1.
__________________________________________________________________________________________________
BE6007-16
1313 Fermentation Monitor
LumaSense Technologies A/S
Instruction Manual
Page 18 of 116