Download Operations Manual

OPERATION MANUAL
+kW/s Set point (yellow) – dP/dt (kW/s) discharge slope set point received from Customer over
TCP/IP network and used in Remote mode.
-kW/s Set point (white) – dP/dt (kW/s) charge slope set point set from HMI and used in Local mode.
-kW/s Set point (yellow) – dP/dt (kW/s) charge slope set point received from Customer over TCP/IP
network and used in Remote mode.
After Time Break Points have been populated MODE 1 – TIME SCHEDULE screen is used for
overview of the process.
Mode 1 Time Schedule Screen
.
1. Operation Mode
Local – Operation mode requested locally from HMI.
Actual – Actual system operating mode
2. Control
Remote – The ABB System is taking commands from remote client communication
Local – The ABB System is controlled from local HMI.
Document Number
ABB Inc.
601887-0A1-M99
Lang.
Rev..
E
0
Sheet
36
No. of sh.
56