Download Operations Manual

OPERATION MANUAL
be carried out using maximum available power.
The Customer has the option to limit power during
charging cycle if Pr value is set less than maximum charging value of -500 kW. Once the charge cycle is
competed (BES SOC=100%), the ABB Control System will stop charging and inhibit inverters waiting for
discharge cycle to begin.
Time synchronization (TSP) and Actual feeder load Pm are not required in this mode.
MODE 2 – REMOTE CONTROL screen is used for overview of the process.
Mode 2 Operator Control Screen
Document Number
ABB Inc.
601887-0A1-M99
Lang.
Rev..
E
0
Sheet
42
No. of sh.
56