Download 315 i-TECH Users Manual

Allen Datagraph 230/315 Vinyl Cutter
FEATURES
Gold Touch Cutting Head
The Model 230 features Allen's exclusive Gold Touch Cutting head, which
allows the user up to 550 grams of cutting pressure.
There are 2 modes to the force adjustment, which can be accessed through the
Windows remote panel provided with the cutter. These modes are contained in the
OPTIONS menu under SETUP in the remote panel program.
The two modes are listed as FORCE POT RANGE, high and low.
Low is sufficient for most vinyl cutting applications, and has a top cutting
pressure of 250 grams at 100% on the cutter's force dial.
High has a top force of 550 grams, and is used when cutting heavier materials
such as sandblast mask, magnetic sheeting, etc.
Modes Of Operation
The 230/315 Vinyl Cutter has two modes of operation: Cut and Draw. These
modes may be activated by HPGL command in the sign making software or from the
Allen Remote Panel program.
Flexible Material Type and Size
A wide variety of vinyls, films, papers, stencil, sandblast mask and banner
materials can be handled by the 230 for cutting, drawing, plotting and banner
making.
The 230 will handle sheets or rolls of material in widths from 3.5 inches (90 The
The Model 230 accepts material from 3.5" (88.9mm) to 30 inches (762 mm) in
width. The 230 automatically detects material width during the Load cycle by
2