1
Download SASSuite User Manual
Transcript
SASSuite User Manual Version 6.25 Setting Default Value Description AUTO_WAIT_SATA_ AFTER_PMREQ_P_ FOR_RESPONSE FALSE When set, the generator will insert WAIT_FOR SATA_PMACK or SATA_PMNAK command immediately after each case of SATA_CONT primitive following SATA_PMREQ_P primitive. AUTO_WAIT_SATA_ AFTER_ SYNC_FOR_SYNC FALSE When set, the generator will insert WAIT_FOR SATA_SYNC command immediately after each case of SATA_CONT primitive following SATA_SYNC primitive. AUTO_WAIT_SATA_BEFORE Settings LeCroy Corporation AUTO_WAIT_SATA_ BEFORE_ PMACK_FOR_PMREQ FALSE When set, the generator will insert WAIT_FOR SATA_PMREQ_S or SATA_PMREQ_P command right before each SATA_PMACK primitive. AUTO_WAIT_SATA_ BEFORE_ PMNAK_FOR_PMREQ FALSE When set, the generator will insert WAIT_FOR SATA_PMREQ_S or SATA_PMREQ_P command right before each SATA_PMNAK primitive. AUTO_WAIT_SATA_ BEFORE_ RERR_FOR_WTRM FALSE When set, the generator will insert WAIT_FOR SATA_R_ERR command right before each SATA_WTRM primitive. AUTO_WAIT_SATA_ BEFORE_ ROK_FOR_WTRM FALSE When set, the generator will insert WAIT_FOR SATA_R_OK command right before each SATA_WTRM primitive. AUTO_WAIT_SATA_ BEFORE_RIP_FOR_ SOF FALSE When set, the generator will insert WAIT_FOR SATA_R_IP command right before each SATA_SOF primitive. AUTO_WAIT_SATA_ BEFORE_ R_RDY_FOR_X_RDY FALSE When set, the generator will insert WAIT_FOR SATA_X_RDY command right before each SATA_R_RDY primitive. 251
