Download APOLLO/GALILEO Interface Preparation

To re-transmit records that have already been sent, first issue an HQB/ACC/DS to see MIR's by sequence number. The
image of a MIR appears on the screen. Issue the HQT command to retransmit that one record. HQB/MD moves you to the
next MIR, continue issuing the HQT until all MIR's desired are retransmitted.
HQB/ACC/DS
Display first message sent
HQB/ACC/DP
Display first message pending
HQB/ACC/00123
Display mess by seq #
HQB/MD
Scroll down in HQB display
HQB/MD5
Scroll down 5
HQB/MU
Scroll up in HQB display
HQB/MU5
Scroll up 5
HQT
Resend from HQB display
HQT/00123
Resend single item by seq #
HQT/00123-00133
Resend seq #'s by range (recommendation is no more than 20
at a time)
Controlling the Apollo MIR
This is not meant to be an exhaustive list of Apollo commands to control the Accounting queue. Please check with Apollo
Galileo support for additional definitions.
APOLLO
Command
Description
HMLD
Verify linkage of CRT to MIR line & obtain line address (usually
ending in 04)
HMLMLNIATADA
Link CRT to MIR line
HMOMLNIATA-U
Place linkage in UP status
HMOMLNIATA-D
Place linkage in DOWN status
HMLMAPOIDDA
Link CRT to MIR line (Canadian Customers)
//HMUP APOID
Place linkage in UP status (Canadian Customers)
//HMDP APOID
Place linkage in DOWN status (Canadian Customers)
3
10/15/15