Download SmartNode 5300 Series Enterprise Session Border

1 • 5300 General Information
SmartNode 5300 User Manual
SmartNode 5300 Series Model Codes
The SmartNode 5300 Series consists of several models. The models differ in terms of possessing a WAN interface or not. All models come equipped with four 10/100 Base-T Ethernet ports.
Table 1. SmartNode 5300 Models
Model
Transcoding Sessions
SN5300/4B/EUI
Base model with 4 SIP sessions
SN5300/4B2G/EUI
Model with 4-wire G.SHDSL interface and 4 SIP sessions
SN5300/4B4G/EUI
Model with 8-wire G.SHDSL interface and 4 SIP sessions
SNSW-1B
License for additional SIP sessions
SmartNode 5300 Series Rear Panel
SmartNode 5300 Rear Panel (non G.SHDSL.bs models)
The SmartNode 5300 Series rear panel ports are described in Table 2.
Figure 2. SmartNode 5300 rear panel (non G.SHDSL.bis)
Table 2. SmartNode 5300 rear panel ports (non G.SHDSL.bis)
Port
Description
ETH 0/0 - 0/3
Auto-MDX Ethernet ports, RJ-45 (see figure 2) connects the unit to an Ethernet Device.
The four Ethernet ports can be configured independently to be used either as a
WAN, LAN, or DMZ port.
Console
Used for service and maintenance, the Console port (see figure 2), an RS-232 RJ-45
connector, connects the product to a serial terminal such as a PC or ASCII terminal
(also called a dumb terminal).
Configuration settings:
•
•
•
•
19200 bps
8 bits, no parity
1 stop bit
flow control off
12V DC, 3.0A
Electricity supply socket. (See figure 2.)
Reset
The reset button (see figure 2) can be used to perform a hard reboot of the device.
USB
USB host port, for future use.
SmartNode 5300 Series Rear Panel
4