Download Hoisting Optimized CANopen M238

Transcript
www.infoPLC.net
Hoisting Solution
Introduction
General
This chapter describes the function, the architecture, dimensions, quantities and the
different types of components used within this solution.
The controller in this application is a Modicon M238 Logic controller. The drives ATV71 and
ATV312 are connected to the controller via a CANopen bus. The example application
includes two functional safety options according to EN ISO 13849-1 standards: an
Emergency Stop function supervised by a Preventa Safety Module (see the appropriate
hardware manual), plus a second Preventa Safety Module to evaluate protective door
sensors.
Operational Function
Introduction




The Industry crane has a dual 3 axis movement. 2 x Hoist, 2 x Trolley and 2 x
Traveling. The movement is performed using variable speed drives.
The operator controls the crane using a pendant station or, optionally, a radio remote
control station. The control device has the power on/off switches.
For bridge travel and trolley movements, a minimum of two speeds are implemented.
To help protect the crane from damage, all movement is monitored with sensors for
indication or detection. The controller software uses the input from these devices as
inputs to the Application Function Blocks which are described in further detail within
this document.
Explanation
of Crane
movements
Hoisting Optimized CANopen M238
Schneider Electric
12