Download User manual

User
Function
Master/family
Change auto alarm image size
Master/family
Change auto alarm imaqe quantitv
Masterffamily
Set image brightness
lvlaster/famitv
Set lmaqe direction
#32#value#
Valuel: 160x128 2:
32Ox24O (eVGA defautt) 3: 64OX4BO (VGA)
For example: #32#1# means auto alarm image size is 160-.12g.
#33#quanfity# The quantity range: 2-9, defaurt is 5.
The value should be:
Set lmaqe contrast
#38#valuei
lvlaster/family
Set interval of auto caoturino imaoe
#103rnime#
Master/family
Add or modify E-mail address.
# 1o8#Email address#
Delete E-mail
#109#Email address#
Disable sending MMS image to E-mail when alarm
(Defautt)
#'t1od.O#
Send MMS imaoe to E-mail when atam
Master/family
Delete family user
#110#1#
#'\1#fanily useft
N.olg-:
Masterfamaly
Set timinq send MMS imaoe
Disable timing send MMS iamqe
.l
,2,3,4,5 ( ig darkest, 5 is brightest
), defautt vatue is 4
The value 1 means up down,2: left, right;3: normal
The
1
#35#valu#
Master/family
Masterffamily
rf image size is 640x480, the quantrry rs 1 0r 2
#34#vaiu#
Specify the family user you want to detele, for #113# means delete all the famitv users
#115#1#
#1',t5t0#
#116#work day#periodl start time#periodl end time#periodl interval#period2 start
time#period2 end time#period 2 intervar#period3 start time#period3 end time#period3
i
Master/family
Set time period of auto send MMS image
nterval#.
For example,#116#1#08oo#12o0#1430#'r630#30# means during I AN/r to 12 AM and
2:30 PM to 4:30 PM of every Monday, the device will auto send out a l\iil\itS image in
every 30 minutes.
Work day: (one digit, 0-8) O for everyday; I means from l\ilonday to Friday; j for Monday;
2 forTuesday; 3 for Wednesday; 4 for Thursday; S for Friday; 6 for Saturday, 7 for
Sunday.
start lime-end time: (4 digits, 24 hours, such as oooo means oo:ooAM, 2359 means 11 .59 pM)).
lntervaltime: (1-3 digits, 1-480, means sending MMS imaoe intervat ) .l-4Bo minutes interuar
#117*value 1#value 2#value 3#
Master
Lock camera and SIM card
Value
t
Value 2
Master/family
can be choose lrom 0 and
1
&n
be choose from
O
and
1
Value3 ean be choose from
O
and
1
Activate infrared body detector
#11ffi1t
Deactivate infrared body detector
#118,,0#
Masterfamily
Set MMS cenle!.
Master/family
SetAPN parameter
Masier/family
Change language
lvlaster/familv
Timino arm the device
Master/family
Set timing arm the device schedule
0 means not lock sim card, 1 means lock sim card
0 means not lock camera, 'l means lock camera.
0 means not lock operator
#1?4#Ltls center#
fl2sf.gateway ti#wap port#trttp port#ipN#ApN user name#ApN password#
Note:.Donl omit the symbol # eiren when the ApN user and ApN password are blank.
#127#ualuef
0
#128*$atue#
Refer to Chapter 3, euick start, 3.Timinq arm the camera
#12gltwork dawperiod
Chinese
'l
Fndlish
1 arm time#period 1 disarm time#period 2 arm time#period 2
disarm
time#period 3 erm time#period 3 disarm time#
Please flnd instruction of work day, arm time and disarm time jn "set time period of auto send MMS"
Master/family
Close/ Open indicator
#'143#value*
The value can be 0 or 1, 0 means close the indicator, 1 means open the indicator, defaull settino is
Masterfamily
Disable SMS notification when the Dower chanoed
Send SMS notification when the oower chanoed
Master/ familv
Set MMS sending way
Masler/ familv
PIR activate delav time /seconds)
#'t44#W
#144#1fl
#'148#value# Value 1 means MMS sent by Http way
Value 0 means MMS sent by WAP way
#1so#value# Value is numberfrom 0-10 (seconds)
Masler/ familv
Regulate device time
*1s2*number#
Master/ familv
Close/open the sDeaker
#16#ualue#
Value 0 means close, value 1 means open.
Master/ familv
Alarm sound On / Ofi
#166#value#
Value 0 means off, value 1 means on, default is
Master
Sendlng control code of intellioent switch
Master
Sendinq control code
of
intellioent switch (timino)
Master
Sending intelligent switch control switch timing peried
Masler
Delete intelliqent switch
Number is the device slM number. This command is used to reoulate device time
#'lgffiswitch name#value# value 0 means alwavs
#191#switch
name#value#
ofF.
O
value 1 means on
value 0 means OFF, value 1 means ON
#1g2#switch namerrworking day#Always ON time#Always OFF time#
#1g3#switch name#
1