1
Download Beta Test Release notes
Transcript
Magnification Tolerance Factor µ (microns) 80% ±35µ 85% ±51µ 90% ±69µ 95% ±85µ 100% ±101µ 105% ±108µ 110% ±115µ 115% ±124µ 120% ±132µ 125% ±140µ 130% ±147µ 135% ±152µ 140% ±163µ As the above table shows, the tolerances allowed reduce rapidly for magnification factors below 100%. For this reason the final print method should be considered carefully when choosing a magnification factor. For example, some printing processes are too variable to consistently print small (e.g. 80%) EAN codes. Barcodes creation and programming. To enable the printing of Barcodes to be created and embedded into a Printable document, The Tempest DSM uses a defined set of PCL compliant Escape sequences. The Tempest DSM will interpret a series of special font commands which are called within the PCL5 escape sequences. These escape sequences follow a standard command set format and structure. An understanding of how PCL compliant printers and the PCL control code are interpreted would be beneficial. - 81 Copyright © 2005 William Matthew Limited. All rights reserved.
