Download Compass 20 User Guide

Descriptions
Arming/Disarming
To arm or disarm a partition, perform the following steps:
Step
1
Action
Select Arm or Disarm as required.
The Partition Selection dialog box is displayed.
Figure 9-1 Arm/Disarm - Ademco
In FBII panels Arm/Disarm is a single option. The arm/Disarm dialog box is
displayed.
Figure 9-2 Arm/Disarm - FBII
2
Select OK (Ademco) or Select (FBII) as the case may be.
Setting the Time
To set the time in the panel, perform the following steps:
Step
1
132
Action
From the list of commands in the Communication screen, select Timeset.
Compass 2.0 User Guide
Honeywell
R2.0
07/10