Download PTQ 101S User Manual

PTQ-101S ♦ Quantum/Unity Platform
IEC-60870-5-101 Slave Communication Module
Configuring the Processor with UnityPro XL
User Manual
To verify address and driver settings in UnityPro XL:
1
Open the PLC menu, and choose STANDARD MODE. This action turns off the
PLC Simulator, and allows you to communicate directly with the Quantum or
Unity hardware.
2
Open the PLC menu, and choose SET ADDRESS... This action opens the SET
ADDRESS dialog box. Open the MEDIA dropdown list and choose the
connection type to use (TCPIP or USB).
3
If the MEDIA dropdown list does not contain the connection method you wish
to use, click the COMMUNICATION PARAMETERS button in the PLC area of the
dialog box. This action opens the PLC COMMUNICATION PARAMETERS dialog
box.
Page 40 of 179
ProSoft Technology, Inc.
October 5, 2009