Download USER MANUAL

Laser & Electronics
3
BASIC DATA
3.1
Name and address of the manufacturer
Company name:
LPKF Laser & Elektronika d.o.o.
Abbreviated name: LPKF d.o.o.
Address:
Zgornje Jezersko 32
SI – 4206 Zgornje Jezersko
Telephone (head office):
Fax (head office):
Internet:
www.lpkf.si
e-mail:
[email protected], [email protected]
Trade-mark:
3.2
+386 (04) 20 13 800
+386 (04) 20 13 820
Laser & Electronics
Indication to what type or series do the instructions refer to
LPKF ProtoPlace
3.3
Intended use
ProtoPlace is a placer intended for professional use in assembling printed
circuit boards with most of the surface mounted components (SMD),
currently available on the market. The device is intended for:
- placing components
- dispensing of soldering pastes, glues and washers
3.4
Technical data
Max. size of PCB
Min. size of components
297 × 420 mm (11.8” × 16.5”)
0201 chip components
220-240 V/50 Hz or 110-120 V/60 Hz
10 W
6 bar (6 × 105 Pa), min. 10 l/min.,
dry, non-lubricated
Power supply
Compressed air supply
Dimensions of basic device
(W × L × H)
Device dimensions (max.)
Weight
Vacuum
Pulse / Pause duration
Number of dosing points
Dosing quantity
Turntable position
Feeders position
760 × 760 × 250 mm
1000 × 900 × 500 mm (with feeders and turntable)
25 do 35 kg (with additional/optional equipment)
0 – 0.8 bar (0 – 0.8 × 105 Pa)
0.1 - 9 s/0.1 - 2 s
up to 300/min
min. 0.2 mm3
Backward or left
Left
temperature: 5 - 35 oC
humidity:
30 - 95 %
general level of lighting:
500 lx
Operating conditions
7