Download Manual

ICONS Area
Icons are words or symbols like the word “DEPTH” or “SPEED” that help
remind you what data is being displayed. The ICON area contains numerous
checkboxes - one for each possible display icon. Checking a box will cause
that icon to be “On”. Unchecking the box will clear that icon from the display.
The icons are not specifically tied to any data source. You have the freedom to
check or uncheck any or all the icons you want. Each of the 16 different display
configurations has its own set of icons that you can set or clear.
Pulldown Menu Area
There are standard Windows pulldown menus to save/recall configuration files,
edit various parameters such as Bar Graph Type, Display Damping or set the
communications port to talk to the MaxRp110. Clicking on some pulldown
menus can result in a second pulldown menu being displayed which may offer
additional choices.
Files Menu: The Files menu shown below enables you to save and recall complete sets of Display Configurations along with the associated High and Low
Alarm settings, High and Low bar chart limits and Icons. Clicking “Save” will
save the current set of display configurations into the
default file which is loaded when the program starts.
Clicking “Save As” will enable you to save the current
set of display configurations into a new named file for
later recall using the “Open” menu item. Clicking on
“New” will clear the current display configurations to
the factory defaults.
Page 21