Download "user manual"

Transcript
Migrating two legacy HP servers to one Dell PowerEdge T410
running Microsoft Windows Server 2008 R2
of the directory partition count as well as the names of
the listed partitions.
3. Next, type net stop “dns server” and press Enter.
4. Once the service has successfully stopped, type xcopy
%windir%\system32\dns c:\dns_export /s and press
Enter.
5. Type d to specify a directory name.
6. Go to the newly created dns_export folder in C:\, and
delete the Samples folder.
7. Click Start, Run, and type regedit
8. When the Registry Editor window appears, go to the
following keys below, right-click each, and click Export.
Save each one in a location where you can copy them
off later.
- HKEY_LOCAL_MACHINE\System\CurrentControlSet\S
ervices\DNS\Parameters
- HKEY_LOCAL_MACHINE\Software\Microsoft\Windows
NT\CurrentVersion\DNS Server
9. Copy the dns_export folder and the two exported
registry keys to the Destination server.
10. In the command prompt window, type net start “dns
server” and press Enter.
To finish the DNS server role installation, complete the following
steps on the destination server:
1. Open a command prompt window by clicking Start, Run,
and typing cmd.
2. In the command prompt window, type dnscmd
/enumdirectorypartitions, press Enter, and verify
that the partition count and the names of the listed
partitions match those of the source server. If any of the
partitions are missing from the destination server, type
dnscmd /enlistdirectorypartition
<partitionname>, where <partitionname> is the
missing partition. For example,
DomainDnsZones.test.local.
3. Next, type net stop “dns server” and verify that the
service stopped successfully.
4. Take the contents of the dns_export folder and copy
them into C:\Windows\System32\dns.
5. Double-click each of the exported registry keys and
install them into the registry.
6. Type net start “dns server” and press Enter.
20