Download User`s Manual

Transcript
MediaPack Series
ini File Parameter
ProxySet
Description
This ini file table parameter configures the Proxy Set table by assigning
various attributes per Proxy Set ID. The format of this parameter is as
follows:
[ProxySet]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime,
ProxySet_ProxyLoadBalancingMethod, ProxySet_IsProxyHotSwap;
[\ProxySet]
For example:
[ProxySet]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime, ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap;
ProxySet 0 = 0, 60, 0, 0;
ProxySet 1 = 1, 60, 1, 0;
[\ProxySet]
Notes:
ƒ
This table parameter can include up to 6 indices (0-5).
ƒ
For configuring the Proxy Sets, refer to the ini file parameter
ProxyIP.
ƒ
For configuring the Proxy Set ID table using the Web interface, refer
to ''Proxy Sets Table'' on page 117.
ƒ
For an explanation on using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 229.
UseSIPTgrp
For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
EnableGRUU
For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
UserAgentDisplayInfo
For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
SIPSDPSessionOwner
For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
RetryAfterTime
For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
EnablePAssociatedURIHe For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
ader
EnableContactRestriction For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
ReRegisterOnConnection Enables the device to perform SIP Re-Registration upon TCP/TLS
connection failure.
Failure
SIP User's Manual
ƒ
[0] Disable (default).
ƒ
[1] Enable.
260
Document #: LTRT-65410