Download User`s Manual

SIP User's Manual
3. Web-Based Management
¾ To load an auxiliary file to the device using the Web interface, take
these 6 steps:
1.
Open the 'Load Auxiliary Files' page (Management tab > Software Update menu >
Load Auxiliary Files page item).
Figure 3-98: Load Auxiliary Files Page
2.
Click the Browse button corresponding to the file type that you want to load, navigate
to the folder in which the file is located, and then click Open; the name and path of the
file appear in the field next to the Browse button.
3.
Click the Load File button corresponding to the file you want to load.
4.
Repeat steps 2 through 3 for each file you want to load.
5.
To save the loaded auxiliary files to flash memory, refer to ''Saving Configuration'' on
page 207.
6.
To reset the device (if you have loaded a Call Progress Tones file), refer to ''Resetting
the Device'' on page 204.
Notes:
•
Saving an auxiliary file to flash memory may disrupt traffic on the device.
To avoid this, disable all traffic on the device by performing a graceful
lock (refer to ''Locking and Unlocking the Device'' on page 206).
•
You can schedule automatic loading of updated auxiliary files using
HTTP, HTTPS, FTP, or NFS (refer to the Product Reference Manual).
You can also load the Auxiliary files using the ini file. Before you load the files to the
device, in the ini file you need to include certain ini file parameters associated with these
files. These ini file parameters specify the files that you want loaded and whether they must
be stored in the non-volatile memory. For a description of the ini file parameters associated
with the auxiliary files, refer to ''Configuration Files Parameters'' on page 302.
Version 5.4
209
May 2008