Download EM4Soil - uplink

Transcript
EM4Soil-v1.05 – a program for 1D Laterally Constrained Inversion
______________________________________________________________________
Figure 5.5.18 will appear when the GPS correction option is selected. This allows the
instrument orientation, the GPS location and the method of GPS correction to the a
data collected by each sensor. This last option is valid only for DUALEM instruments.
Please, read APPENDIX C for further details.
NOTE: Site correction should be applied at profiles. It can be used also in mapping
surveys if data was collected in continuous parallel profiles (bidirectional
acquisition ↑↓↑). Note that the correction assumes that the transmitter loop is
behind receivers during the acquisition.
Figure 5.5.18. Drop down box menu for GPS correction option.
5.5.9 Converting Latitude and Longitude to UTM
The Lat/Long to UTM option tool allows the conversion of GPS data acquired in
Latitude and Longitude into UTM coordinates. This conversion is possible for five
datum selecting the appropriate central meridian of the zone. The calculations are based
on
the
formulas
presented
by
Steven
Dutch
(http://www.uwgb.edu/dutchs/usefuldata/utmformulas.htm).
25