Download ICN 2005 ConferControl Computer based Controlling Program for

•
«Refresh» (A.2.)
When pressing this button the program checks and lists those ports to which a controllable
ICN 2005 conference system is connected.
•
«Hardware port» (A.3.)
Here the list of those ports suitable for connection is displayed, to which there is a
controllable conference system is connected.
•
«Connect» / «Disconnect» (A.4.)
If there is a port suitable for connection, then upon clicking on this button the controlling
program becomes connected to the conference system and it starts logging in its units.
This button remains inactive till the end of the process. After ending the conference it is
possible to get disconnected from the system with the aid of the same button.
•
«Units» (A.5.)
The address, the types (president, participant) and the priority levels (0-3) of the logged
in units are displayed in this table.
•
«Time of attendance check» (A.6.)
It is possible to set here the time that is allocated to checking attendance, during which the
participants may indicate their attendance by pressing any of the voting buttons of the
delegate units. The time may be arbitrarily set between 10 – 240 seconds by pressing the
arrows that point upwards and downwards with 5 sec steps.
•
«Chipcard» (A.7.)
After getting connected to the conference system, but before loading the current
conference, it is possible to enter or re-enter the number of the chipcards.
•
«Edit languages» (A.8.)
With the aid of this press button it is possible to generate the controlling program in any
arbitrary language. It is also possible to execute here the rewriting or modifying of all the
labels that are displayed on the screen, in line with the demand of the user.
•
«Participants» (A.9.)
This function is for entering and editing the data of the participants of the conference.
•
«Conference designer» (A.10.)
Here it is possible to plan the conference and at the same time it is possible to enter all the
data that are needed for the conference.
•
«Conference Log» (A.11.)
It is for viewing the data of the completed conferences (name of conference, its topic, date
and time, name of participants and their data, time and duration of speeches, name of
voting events, their method and results, etc.)
•
Exit (A.12.)
Here it is possible to exit the conference controlling program. Before exiting, the program
asks confirmation, then it closes everything properly and finally it stops the running of the
program.
11