Download Installation Instructions

Edge Products ______________________________________GM Juice-Attitude CS/CTS
Connect the green wire
to the left side of this
fuse, using the supplied
fuse tap. ITBC (Fuse 19)
Connect the yellow wire
to the right side of this
fuse, using the supplied
fuse tap. ECM IGN
(Fuse 53, but may be
location 56)
Front of vehicle, back of vehicle
Power Gains
Level
Horsepower
Torque
LEVEL 0
0
0
LEVEL 1
30
60
LEVEL 2
40
80
LEVEL 3
50
90
LEVEL 4
60
100
LEVEL 5
80
130
LEVEL 6 (See Hot Unlock section)
85
200
Final Inspection
Recheck all connections for a properly secure installation. Using the supplied wire ties,
secure the wiring harness to prevent possible damage.
Start the engine. The engine should start and run like a stock truck. If the engine does not
start or run properly, turn off the motor, remove the keys from the ignition, wait 2 minutes
then remove the juice module and inspect the pins inside all connectors. Straighten pins or
clear foreign material from the pins and connector surfaces, then re-install the connectors.
If failure conditions still exist, contact your dealer or Edge Products, LLC. When trying to
restart, make sure that the key has been turned off for at least 10 seconds before cranking
the engine.
15