Download G717 Revised

2.4 SET USER NO.
To set user No., you can use any mobile phone to send the following SMS command
to the SIM card No. which is inside the device:
with country code
Message
1234,UNO;+8613912345678
1234,UNO;13912345678
without country code
Command Control Word
Send SMS
UNO:13912345678
Reply
UNO:+8613912345678
Note
“86” is country code of China. If the device is not used for
international roaming, you can also ignore the country code
and just send the phone number like
“1234,UNO;13912345678”.
Device will send SMS to user each 30 min or alarm triggered. To
protect device, if there is any error in this command, device will
not send back any error warning.
Then user can fulfill other functions by sending user
commands. After user sending command, device will reply one
confirmation SMS back to user mobile phone.
6