Download MT100 Manual - DATAQ Instruments

Settings and Measurement
(4)-2 Bar Graph Settings
This section allows you to select the display method of bar graphs.
Setting items
Bar Graph Settings
Standard
Center
<Standard>
Description
Displays the bar graph with the reference point set to the bottom of the bar.
Displays the bar graph with the reference point set to the center of the bar.
<Center>
(4)-3 Waveform Display Settings
This section allows you to set the display color, line width, and display ON/OFF of each waveforms.
①
Setting items
(1) Color
(2) Width
(3) Trace
3-30
②
③
Description
Sets the waveform display color for each channel.
Colors can be set by specifying the RGB values from 0 to 31, or by selecting from 10 default colors.
Sets the line width of the displayed waveforms.
Values can be specified from 1 to 8 dots.
Enables/disables waveform display.
ON
Enables waveform display.
OFF
Disables waveform display.
Data capture can be performed.