1
Download Display - Service, Support
Transcript
General (continued) Table 5-2 illustrates the LED indicator status for the user-initiated self-test. Table 5-2 Indicator Status for Self-test LED Pass Fail/Not Installed Adapter Good On Off ROM, RAM, Watchdog Transmit On Off Network Interface: Loopback, Jabberstop, Network Data Rate Receive On Off Host Port (same tests as above) Test Flashing Flashing Sub-tests Included Test completed Note: During the test, the Comm Active and Online LEDs are off. Burn-in and Final Tests 5-4 Diagnostic Tests The burn-in and final tests are primarily factory tests and are normally not used in any applications. SIMATIC TIWAY I Host Adapter User Manual
